A concrete business with several vehicles usually insures them on one commercial auto policy with a schedule that lists each vehicle and driver. The part that takes care is describing pickups, mixers and pump trucks as the different exposures they are, and covering the cars and trucks you use but do not own.
This post is for concrete contractors, ready-mix producers and pumpers adding trucks, reviewing a renewal or trying to understand why one policy covers three very different vehicles.
One policy, three kinds of vehicle
The pickup carries a foreman to a site. The mixer hauls a loaded drum on public roads. The pump truck drives to the job, sets up outriggers and places concrete with a boom. All three are commercial auto, but each is classified by use, and each shows different claims.
The commercial auto coverage page explains the policy structure. Tell the carrier what each vehicle actually does, because a schedule that calls everything a service truck leaves the hard questions for the claim.
Pickups and service vehicles
A pickup is the simplest line on the schedule, but it may be the vehicle used most often. Underwriters look at who uses it, whether employees take it home and whether it tows equipment. Drivers should be listed or the policy should say how unlisted drivers are treated.
Mixers
A mixer is a hauling exposure with a heavy load carried high on the chassis. Questions that matter include how the policy values the truck, how it treats the drum and what it says about use on private ground. For federal and state motor-carrier questions, the cement truck insurance post explains when filings apply and when they do not.
Pump trucks
A pump truck is both a vehicle and a piece of placing equipment. The auto policy answers for road exposure; the boom, outriggers and work near overhead lines raise separate questions. The concrete pump truck insurance post and the boom truck physical damage post go further.
Real-World Scenario: A concrete business adds a second mixer and a new pickup in the same month. The agent updates the schedule for the pickup but the mixer is added at the next renewal. A month later the mixer is in a crash, and the question is whether it was a scheduled auto on the date of loss. The fix is simple: add each vehicle when it is acquired, or confirm in writing how newly acquired autos are treated.
Next step. Start a quote with your vehicle list, driver list and a short note on what each vehicle does. We start with the fleet schedule, authority and plant permits.
Trailers, newly acquired vehicles and hired autos
Concrete businesses also run trailers for tools, forms and small equipment, and they buy and sell vehicles during the year. Ask how trailers are scheduled, whether attached equipment is covered with the vehicle, and how the policy treats a vehicle acquired mid-term. The answer should be in writing, because the date of loss decides it. The guide to adding trucks mid-policy walks through that question in detail.
Concrete businesses often use vehicles they do not own: a rented truck on a busy week, a borrowed trailer, an employee’s personal pickup. Hired and non-owned auto responds to liability from those uses. The hired and non-owned auto post explains where that seam opens and how to close it.
Drivers, garaging and filings
The driver list, license class, garaging location and how far the vehicles run all feed the underwriting. Filings, such as a USDOT number or state registration, are added where the operation calls for them. Do not assume any of these apply; confirm them against how the vehicles are used.
A schedule is only as useful as it is current. Remove vehicles that are sold, add the ones that arrive and update the driver list when someone joins or leaves. Many auto disputes start with a vehicle or driver that was not on the schedule on the date of loss. A short review each quarter costs little and keeps the policy aligned with the fleet you actually run.
How commercial auto fits the larger program
Auto liability is usually one of the underlying policies an umbrella sits above, and the checklist shows how auto fits with general liability and comp. Review the whole set at renewal, not one policy at a time. The quote form is the place to start.