Coverage Explained

Concrete Finisher Insurance: What Subcontractors and Self-Employed Finishers Are Asked to Prove

A crew in high-visibility vests finishing a long formed concrete strip beside a mixer truck — concrete contractor insurance

A concrete finisher who works as a subcontractor is usually asked to prove general liability, often with additional-insured wording, and workers’ compensation or whatever the contract accepts in its place. What counts comes from the contract, not from a single rule, so the insurance section is the first thing to read.

This post is for subcontracted and self-employed finishers, and for small finishing companies that get certificate requests from general contractors.

What a general contractor usually asks a finisher to show

The request typically has four parts: a certificate of insurance, additional-insured status for the general contractor, a waiver of subrogation and a minimum on the liability side. The contract sets each one. Some are stated outright in the subcontract; others come in a separate insurance exhibit.

Treat the exhibit as the specification. If the contract asks for something your policy does not do, find out at the bid, not when the certificate request lands mid-job. The what insurance concrete clients require post lists the usual asks.

A general contractor is answerable to the owner for everything on the site, so it passes insurance requirements down to every trade it hires. A finisher is often the last trade to touch the slab, which puts the finish, the surface and any later complaint about them in the finisher’s lane. That is why the request is routine and why it is worth understanding rather than just forwarding to an agent.

General liability for a finisher

General liability pays for third-party bodily injury and property damage from your work: a trip hazard left on a finished surface, overspray on a neighboring vehicle, a slab that fails later. The completed-work piece is called products-completed operations, and it is the one a concrete trade should confirm is present. The completed operations post explains the coverage and why a claim can arrive long after you leave.

Additional insured and the two common endorsements

General contractors usually want to be named on your policy. The common forms are CG 20 10, which addresses ongoing operations, and CG 20 37, which addresses completed operations. A contract may ask for one or both. The additional insured post explains the difference and blanket versus scheduled wording.

Real-World Scenario: A two-person finishing company bids a warehouse slab for a general contractor. The subcontract asks for additional-insured wording that covers completed work. The finisher’s policy has the ongoing-operations form only. The company finds the gap when the certificate request arrives, and has to ask its agent for a change before the pour. Checking at the bid would have saved a week.

Next step. Start a quote and attach the insurance section of your next subcontract, so the request can be compared to what you carry.

Workers’ comp and the self-employed finisher

Contracts often ask for proof of workers’ compensation even from a finisher who works alone, because the general contractor wants to know who pays if someone is hurt on site. Whether you carry a policy, show an exemption or provide another document depends on your state and on what the contractor will accept. The workers’ compensation page explains how the policy works for employers.

Whether anyone is an employee or an independent contractor is a state-law question. A certificate or contract only shows what is being asked for, and the comparison to what you carry is the useful step.

Tools, equipment and the truck

Finishers carry trowels, power trowels, screeds and saws, and drive trucks or vans to the job. Tools and equipment can be insured through an inland marine or equipment policy, and a work vehicle belongs on commercial auto. The concrete worker insurance guide describes how comp and liability fit for a company that hires help.

Keeping certificates current, and hiring other subs

A certificate shows a policy period, and general contractors check the dates. A certificate that expires mid-job can hold up a payment or a draw. Ask your agent to send a fresh certificate before renewal dates, and keep a folder of every certificate you have issued and every one you have collected, so a request can be answered the same day.

The moment you bring in someone else, the question flips. A general contractor will want to see your certificate, and you will want one from them. A sub without coverage can leave the exposure with you. Collect certificates before work starts, and keep them current.

What to do before your next bid

Read the insurance section, confirm which endorsements you carry, and ask for changes before you sign. When you want help comparing the contract to your policy, send the details through the quote form. For the full list of policies a concrete business usually carries, see the concrete business insurance checklist.

The bottom line

A concrete finisher who works as a subcontractor is usually asked to prove general liability, often with additional-insured wording, and workers’ compensation or whatever the contract accepts in its place. The request comes from the contract, not from a universal rule, so read the insurance section before you bid. Whether a person is an employee or an independent contractor is decided under state law, not by the paperwork alone.

Frequently asked questions

What insurance does a self-employed concrete finisher need?

A self-employed finisher is usually asked for general liability, often with a general contractor named as additional insured. Workers’ compensation, commercial auto for any work vehicle and tool or equipment coverage may also apply. What is required comes from the contract and your state’s rules, so ask the general contractor what it will accept before you sign or start work.

Does a concrete finisher need general liability?

Most general contractors require it from every subcontractor on site, and finishers are exposed to injury and damage claims like any other trade. General liability covers third-party bodily injury and property damage from your work. For a finisher, that includes completed work that fails after you leave, if the policy includes products-completed operations coverage. Read the form to confirm it is not excluded.

Can a general contractor require workers’ comp from a finisher with no employees?

A general contractor can ask for whatever its contract says, and many ask every sub for proof of comp or a documented alternative. Whether a finisher with no employees can satisfy that with an exemption, a policy or another document depends on the state and on what the contractor accepts. Ask the contractor in writing what it will take, then confirm it with your agent.

What is a certificate of insurance for a concrete finisher?

A certificate of insurance is a one-page summary of the policies you carry, issued by your agent, that a contractor uses to confirm coverage before you work. It shows coverage types, policy periods and limits, and may name an additional insured. It is not the policy, and it cannot extend coverage the policy does not already provide.

About the author

Nate Jones, CPCU

Nate Jones, CPCU, is the founder of Wexford Insurance and Concrete Guard Insurance, a specialty insurance agency placing concrete contractor coverage in 48 states across a 23-carrier specialty panel. Connect via the Concrete Guard Insurance quote form or call 317-942-0549.

Insure your concrete operation with a CPCU-led agency

Tell us how you work — an install crew, a pump truck, a ready-mix fleet, or all three — and we will market it to carriers that write the class.