Coverage Explained

Insurance for Concrete Work on Bridge and Highway Projects

A mixer truck chute discharging concrete into a formed slab area set with steel dowels — insurance for concrete work on bridge and highway projects

Concrete work on a bridge or highway job is insured with the same core policies as any other pour, but the public owner’s contract sets the limits, endorsements, registrations and bonds you must show before you start. Reading that contract comes before pricing the job.

This post is for concrete contractors, pumpers and ready-mix suppliers bidding as subcontractors or suppliers on public transportation work: bridge decks, barrier walls, approach slabs, paving and structures.

The contract sets the terms

On private work, your insurance program is mostly your own decision. On a transportation project the owner is a state or local agency, and its specifications state what every contractor must carry. The prime contractor is bound by those terms and passes them down to each subcontractor.

Ask for the insurance and bonding sections of the bid documents, along with the subcontract form, before you estimate. The guide to what clients require explains how to read a requirement. On public work those requirements are fixed by the owner’s specifications, so expect little room to negotiate them.

What usually changes in the insurance

The lines of coverage stay the same. The terms change:

  • Limits. Work beside live traffic raises the stakes of a single accident, so required limits are often higher than on private jobs. An umbrella policy is the usual way to meet them, and the umbrella layering post explains how it sits over the primary policies.
  • Additional insureds. The agency, the prime contractor and sometimes an engineer or a railroad must be named. The additional insured post covers the endorsements.
  • Completed operations. A bridge deck or barrier wall stays in service for decades. The contract may require completed operations coverage to continue after the project is accepted.
  • Work near a railroad. Projects that cross or run beside rail lines often carry a railroad’s own insurance requirements. Ask before you bid, because standard policies may need to be endorsed.
  • Auto. Mixers and pump trucks working inside a traffic-control zone are a commercial auto exposure as well as a jobsite one.
How insurance terms flow down to a concrete subcontractor on a public project A relationship diagram for a bridge or highway project. At the top is the public owner, which sets the limits, bonds and wage rules in its specifications. An arrow leads down to the prime contractor, which is bound by those terms and passes them into each subcontract. A further arrow leads to the concrete subcontractor, which shows certificates, endorsements and registration before it starts work. No figures are shown. Public owner Sets limits, bonds and wage rules in the project specifications Prime contractor Bound by the owner’s terms and passes them into each subcontract Concrete subcontractor Shows certificates, endorsements and registration before work starts, and bonds where the contract asks
Insurance terms on a bridge or highway project flow from the public owner through the prime contractor to the concrete subcontractor.

Bonds are separate from insurance

Public owners protect themselves and the people who supply a project with surety bonds. Texas, for example, requires payment and performance bonds on public work contracts above set contract amounts (Texas Government Code ch. 2253). The prime contractor posts those bonds and may ask a large subcontractor to bond its own portion.

A bond is not an insurance policy. The surety guarantees your performance and expects to be repaid if it has to step in, so it reviews your finances and work history before it agrees. Ask your agent about bonding capacity early; it can decide whether you are able to bid at all.

Next step. Send the insurance and bonding pages of the bid documents through the quote form. We read the form before it binds.

Registration, licensing and wages

Several states add requirements that apply only to public work:

  • California requires contractors and subcontractors to register with the Department of Industrial Relations before bidding on or performing public work, and registrants must have workers’ compensation coverage for any employees (DIR public works).
  • Idaho separately requires a public works contractor license to engage in public works contracting, unless an exemption applies (Idaho Code 54-1902).
  • Texas requires workers on public works paid for with public funds to be paid at least the general prevailing wage for similar work in the locality (Texas Government Code ch. 2258), and requires the governmental entity to have the contractor certify in writing that it provides workers’ compensation coverage on public building and construction projects.

Prevailing wage rules matter to insurance because they raise payroll, and payroll is the basis for the workers’ compensation premium. Price that into the bid. Louisiana’s licensing board also keeps a classification for highway, street and bridge construction that is separate from its general concrete classification, so check that your license covers the work.

Real-World Scenario: A concrete subcontractor wins the barrier-wall package on a highway widening job. The subcontract requires a limit above the contractor’s current program and names the state agency and the prime as additional insureds for completed operations. The contractor priced the job on its existing insurance costs. Adding an umbrella and the endorsements after award takes time, delays the notice to proceed and reduces the margin on the job.

Suppliers and pumpers on public jobs

Ready-mix producers delivering to a transportation project and pumpers placing a bridge deck are usually asked for the same certificates as the concrete subcontractor. The ready-mix and concrete pumping pages cover those programs, and the concrete construction page covers install crews.

Before you bid

Three steps keep a public job from changing your costs after award. Get the insurance and bonding specifications with the bid documents. Send them to your agent before you price the work, so the cost of higher limits or new endorsements is in the bid. Confirm registration and licensing in the state where the project sits.

If you have a public project coming up and want your program checked against it, use the quote form. We write concrete, so the review starts from how the work is actually done.

The bottom line

Bridge and highway concrete work uses the same core policies as private work, but the public owner’s contract decides the limits, endorsements, registrations and bonds you must show before you start. Read the insurance section of the bid documents before you price the job, because meeting those terms can change what your program costs.

Frequently asked questions

What insurance does a concrete contractor need for bridge and highway work?

The same core lines as other work: general liability, commercial auto, workers’ compensation and usually an umbrella. What changes is who sets the terms. The public owner’s contract states the limits, the additional insured wording and any special coverage, and the prime contractor passes those terms down to each subcontractor. Read the insurance section before you bid.

Is a bond the same thing as insurance on a public project?

No. Insurance pays claims for injury or damage on your behalf. A performance or payment bond is a surety’s guarantee to the project owner that you will finish the work and pay your suppliers and subcontractors, and the surety expects to be repaid if it pays out. Public contracts commonly require both, and they are arranged separately.

Do I need a special license or registration for public works concrete?

In some states, yes. California requires a contractor to be registered with its Department of Industrial Relations to bid on or perform public work, and registration requires workers’ compensation coverage for employees. Idaho requires a separate public works contractor license. Check each state’s rule before you bid, because an unregistered contractor can be barred from the job.

Why do highway contracts ask for higher limits than private jobs?

Because the work is done next to live traffic and on structures the public uses, a single accident can injure many people. Public owners set limits to match that exposure and require the same from every tier of contractor. An umbrella policy is the usual way a concrete subcontractor meets a limit above what the primary policies provide.

About the author

Nate Jones, CPCU

Nate Jones, CPCU, is the founder of Wexford Insurance and Concrete Guard Insurance, a specialty insurance agency placing concrete contractor coverage in 48 states across a 23-carrier specialty panel. Connect via the Concrete Guard Insurance quote form or call 317-942-0549.

Insure your concrete operation with a CPCU-led agency

Tell us how you work — an install crew, a pump truck, a ready-mix fleet, or all three — and we will market it to carriers that write the class.