Coverage Explained

Concrete Cutting and Coring Insurance in New York

A crew in high-visibility vests finishing a long formed concrete strip beside a mixer truck — concrete cutting and coring insurance in New York

Concrete cutting and coring insurance in New York is general liability built for the moment a blade or bit meets something inside the concrete, an umbrella sized to demanding contracts, and workers’ comp that satisfies New York law even for crews based elsewhere. The contract usually sets the shape of the program before the underwriter does.

This post is for wall sawing, flat sawing, wire sawing, core drilling and scanning contractors working in New York, especially in occupied commercial and residential buildings. Subs chasing larger work will also want the post on insurance markets for subs on large commercial jobs.

Why cutting work underwrites as its own class

Cutting crews do not place concrete. They open it up, usually after a building is occupied or in the middle of a renovation. That brings exposures a placing crew rarely sees:

  • A blade or core bit through a live electrical conduit, a water or sprinkler line, a gas line or a data trunk.
  • Cutting rebar or a post-tensioned tendon in a slab, which can affect the structure and the people around it.
  • Slurry water running through a core hole onto finished space, equipment or inventory on the floor below.
  • Dust drawn into a building’s air system or into a tenant’s space.
  • Cut sections that drop, swing or slide during removal.

Underwriters commonly ask whether you scan before cutting, who marks the layout, how you contain slurry and dust, and how often you work in occupied buildings or post-tensioned structures.

Hitting what is inside the slab

When a cut damages other people’s property, general liability is the policy that responds: the severed conduit, the flooded office below, the tenant who has to close for a day. It generally does not pay to repair the concrete you were cutting or to redo the opening.

Scanning raises a second question. A contractor who sells ground-penetrating radar scanning or a marked layout as a service is giving advice someone else relies on. Some general liability forms carry a professional services exclusion that can be read against an error in that advice. Ask whether yours does, and whether a professional liability policy makes sense for the scanning side. Keep the scan reports, the marked layout and the general contractor’s sign-off on each opening. When a cut goes wrong, that file is often what separates a defended claim from a dispute over who chose the location.

Where claims arise on a concrete cutting and coring job A diagram for a New York concrete cutting and coring contractor. The upper box covers the period before the cut, when scanning and layout advice can be relied on by others. An arrow leads to the cut itself, when live utilities, slurry water and dust can damage other property. Another arrow leads to the contract terms, where additional insured status, completed operations and a waiver of subrogation decide whose policy answers. No figures are shown. Before the cut Scanning and layout that others rely on to place the opening During the cut Live utilities, slurry water and dust reaching other people’s property The contract terms Additional insured, completed operations and waiver decide whose policy answers
Where claims arise on a New York cutting and coring job: scanning and layout before the cut, utilities, slurry and dust during it, and the contract terms that decide whose policy answers.

Next step. Send your equipment list, a description of your cutting and scanning work and a sample subcontract through the quote form. We read the form before it binds.

Real-World Scenario: A coring contractor drills a series of penetrations through an upper-floor slab in an occupied office building for new plumbing. Slurry water runs through a core hole and soaks ceiling tiles, carpet and computer equipment in the tenant space below. The tenant’s insurer pays the loss and pursues the general contractor and the coring sub. The general contractor tenders its defense to the sub’s policy as an additional insured, and the sub’s own general liability answers the property damage claim.

Silica, water and the crew

Sawing and coring raise silica dust, and dust control is one of the first things underwriters and general contractors ask about: wet cutting, vacuum shrouds, respirator programs and written exposure plans are common answers. Blade failures, kickback, falling cut sections, vibration and noise round out the injury picture. Crews that rig and lower heavy cut sections, or work from lifts on wall saws, add strain and fall exposure that belongs in the payroll description rather than buried under a general concrete class.

New York requires every employer subject to its Workers’ Compensation Law to secure compensation for its employees. An employer may do that through the state insurance fund, through an insurer authorized to write workers’ comp in the state, or by furnishing proof of financial ability to the chair of the board (New York Workers’ Compensation Law § 50). New York’s Workers’ Compensation Board also says out-of-state employers with employees or subcontractors working in the state must carry a New York policy (NY WCB). The workers’ compensation page explains what the policy pays.

The contract and the additional insured page

New York voids a construction-contract promise to indemnify a party for damage caused by that party’s own negligence, whether in whole or in part, while still permitting indemnity for another party’s negligence (N.Y. General Obligations Law § 5-322.1). Owners and general contractors respond by leaning on the subcontractor’s insurance. Contracts, especially in New York City, commonly ask for additional insured status for the owner, the general contractor and several other named parties, primary and noncontributory wording, completed operations coverage, a waiver of subrogation and an umbrella that follows form. The additional insured post explains the endorsements, and the umbrella vs. excess post explains the layer above.

Saws, core rigs, scanners and vacuums belong on an equipment schedule under property coverage. The New York page covers the rest of the state picture. To have a cutting account reviewed, use the quote form.

The bottom line

Concrete cutting and coring insurance in New York is general liability that answers for cutting into live utilities, slurry leaks and dust in occupied buildings, backed by an umbrella sized to the contracts you sign. New York requires employers subject to its law to secure workers’ comp, including out-of-state employers with crews there. Because New York voids indemnity for a party’s own negligence, contracts lean hard on additional insured endorsements, so read them before you quote.

Frequently asked questions

What insurance does a concrete cutting and coring company need in New York?

Most need general liability with completed operations, workers’ comp that meets New York law, commercial auto for saw trucks, coverage for saws, core rigs and scanners, and an umbrella sized to the contracts. Underwriters commonly ask whether you scan before cutting, how you manage slurry and dust in occupied buildings, and whether you cut post-tensioned slabs. Clear answers widen the list of carriers willing to quote.

Does general liability cover cutting into a live conduit or water line?

It generally responds to damage to other people’s property, which can include a severed conduit, a flooded floor below or a tenant’s business interruption. It usually does not pay to repair the part of the slab you were cutting. If you also sell scanning or layout advice, ask whether the policy carries a professional services exclusion, because an error in that advice may sit outside general liability.

Does an out-of-state cutting contractor need New York workers’ comp?

Yes. New York’s Workers’ Compensation Board says all out-of-state employers with employees or subcontractors working in New York State are required to carry a New York State workers’ compensation insurance policy. New York employers may secure it through the state insurance fund, through an authorized insurer, or by proving financial ability to the chair. Tell your agent before the crew crosses the state line.

Why do New York contracts ask for so much additional insured coverage?

New York General Obligations Law § 5-322.1 voids a construction-contract promise to indemnify a party for damage caused by that party’s own negligence, whether in whole or in part. Owners and general contractors look to your policy instead, so contracts commonly ask for additional insured status for several parties, primary and noncontributory wording, completed operations and a waiver of subrogation, often with an umbrella above.

About the author

Nate Jones, CPCU

Nate Jones, CPCU, is the founder of Wexford Insurance and Concrete Guard Insurance, a specialty insurance agency placing concrete contractor coverage in 48 states across a 23-carrier specialty panel. Connect via the Concrete Guard Insurance quote form or call 317-942-0549.

Insure your concrete operation with a CPCU-led agency

Tell us how you work — an install crew, a pump truck, a ready-mix fleet, or all three — and we will market it to carriers that write the class.